FEATURES
Programming track numbers
Selecting a track and searching
Selecting a track during playback
• Briefly press ∞ or § once or several times to skip to |
the current, previous or next track. |
y Playback continues with the selected track, and |
You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program.
1While playback is stopped, select a track with ∞ or §.
vol
PROGRAM
DBB
pro 
the track’s number is displayed. |
Selecting a track when playback is stopped
1Briefly press ∞ or § once or several times to select the desired track. The track number is displayed.
2Press 2; to start CD play.
y Playback starts with the selected track.
Searching for a passage during playback
1Keep ∞ or § pressed to find a particular passage in a backward or forward direction.
y Searching starts while playback continues at low volume. After 2 seconds the search speeds up.
2Release the button when you reach the desired passage. y Playback continues from this position.
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.
2Press PROGRAM to store the track.
y program lights up; the track number |
|
programmed and P with the total number of | program |
stored tracks are displayed. |
|
3 Select and store all desired tracks in this way.
4Press 2; to start playback of your selected tracks.
yprogram is shown and playback starts.
program
• You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all the stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected, SEL is displayed.
– If you try to store more than 30 tracks, FULL is displayed. |
|
Clearing the program |
|
• While playback is stopped, press STOP to clear | program |
program. |
|
y CLRis displayed once, program goes off, |
|
and the program is cleared. |
|
Note: The program will also be cleared if the power supply is interrupted, or if the
