English
CD PLAYER | CASSETTE RECORDER |
Erasing a program
You can erase the program by:
–pressing STOP 9 once in the STOP position or twice during
playback. The display shows ' 
' briefly;
–pressing the CD door open;
–switching to another source: TUNER/TAPE.
CD player and CD handling
•The lens of the CD player should never be touched!
•If the CD player cannot read CDs correctly, use a commonly
available cleaning CD to clean the lens before taking the set to | X |
repair. Other cleaning methods may destroy the lens. |
|
•Sudden changes in the surrounding temperature can cause condensation to cloud over on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.
•Always keep the CD compartment closed to avoid dust on the lens.
• To take a CD out of its box, press the center spindle while lifting the CD. Always pick up the CD by the edge and return the CD to its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the center towards the edge using a soft,
• Never write on a CD or attach any stickers to it.
CASSETTE PLAYBACK
1.Select TAPE source.
™The display shows 
throughout tape operation.
2. Press STOP•OPEN 9/ to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY 1 to start playback.
5. To pause playback, press PAUSE ;. To resume, press the key again.
6. By pressing SEARCH 5 or 6 fast winding of the tape is possible in both directions.
7. To stop the tape, press STOP•OPEN 9/.
– The keys are automatically released at the end of the tape and
the 
indication goes out, except if PAUSE ; has been activated.
D | BB | AZ | 1040 |
14
