English

GENERAL INFORMATION

General maintenance

Do not expose the set, batteries, CDs, or tapes to humidity, rain, sand, or excessive heat (caused by heating equipment or direct sunlight).

The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated!

You can clean the set with a soft, slightly dampened, lint-free cloth.

Do not use any cleaning agents as they may have a corrosive effect.

Tape deck maintenance

To ensure proper recording and playback quality, clean parts A, Band Cafter approximately 50 hours of operation. Use a cotton swab slightly moistened with alcohol or head-cleaner fluid.

Press PLAY 1 and clean the rubber pressure roller A.

Press PAUSE ; and clean the capstan Band the heads C.

Note: Cleaning of the heads Ccan also be done by playing a cleaning tape once.

A

B

CD

 

 

RADIO

CASSETTE

 

 

RECORDER

 

 

C C

CD player and CD handling

The lens Xof the CD player should never be touched. Always keep the CD compartment closed to avoid dust on the lens.

The lens may cloud over when the set is suddenly moved from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture evaporates.

To take the CD out of its box easily, press the center spindle while lifting the CD. Always pick up the CD by the edge and put it back in its box after use.

To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. A cleaning agent may damage the disc!

 

X

STOP

OPEN

 

SEARCH

 

PLAY

 

RECORD

Never write on a CD or attach a sticker to it.

CAUTION

Use of controls or adjustments or performance of procedures other than here- in may result in hazardous radiation exposure.

14

Page 10
Image 10
Philips AZ1050 manual General Information, General maintenance, Tape deck maintenance, CD player and CD handling