Cd Player, Playing a CD, The CD has reached the end, English

English

CD PLAYER

Playing a CD

1.Select CD source.

™ is displayed briefly.

2.Lift the CD door open.

™Display: when you open the CD door.

3.Insert a CD or CD-R(W) with the printed side facing up and close the CD door.

™Display: d1SC flashes as the CD player scans the contents of a CD. The total number of tracks and playing time are then

shown.
Display:	is shown if the CD-R(W) is blank or not
finalised.

4.Press PLAY•PAUSE 2; (on the remote control 2;) to start playback.

™Display: Current track number and elapsed playing time of the track during CD playback.

5.To pause playback press PLAY•PAUSE 2;. Press PLAY•PAUSE 2; again to resume play.

™The display freezes and the elapsed playing time flashes when playback is paused.

6.To stop CD playback, press STOP 9.

Note: CD play will also stop when:

–the CD door is opened;

–the CD has reached the end

(unless you have selected REPEAT or REPEAT ALL);

–you select another source: TAPE / TUNER.

Selecting a different track

•Press SEARCH ∞ or § (on the remote control ¡ or ™) once or repeatedly until the desired track number appears in the display.

•If you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; to start playback.

Finding a passage within a track

PLAY•PAUSE

CD	REMOTE
PROGRAM	SENSOR
REPEAT
ALL

PLAY•PAUSE
CD	REMOTE
PROGRAM	SENSOR
REPEAT
ALL

CD
MODE	SEARCH
	STOP
	PROGRAM

PLAY•PAUSE
CD	REMOTE
PROGRAM	SENSOR
REPEAT
ALL

CD
MODE	SEARCH
	STOP
	PROGRAM

1.Press and hold down SEARCH ∞ or § (on the remote control 5 or 6).

™The CD is played at high speed and low volume.

2. When you recognize the passage you want, release SEARCH ∞ or §.

– Normal playback continues.

Note: During a CD programme or if SHUFFLE/ REPEAT active, searching is only possible within a track.

PLAY•PAUSE

PROGRAM

REPEAT

ALL

CD MODE

STOP

CD	RADIOAZ1145
	CASSETTE	RECORDE

REMOTE

SENSOR