GENERAL INFORMATION ON RECORDING
•Recording is permissible insofar as copyright or other rights of third parties are not infringed.
•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use NORMAL type cassettes (IEC I) on which the tabs have not been broken.
•The best recording level is set automatically. Altering the VOL and DBB controls will not affect the recording in progress.
•At the very beginning and end of the tape, no recording will take place during the 7 seconds, when the leader tape passes the recorder heads.
•To protect a tape from accidental erasure, have the tape in front of you and break out the left tab.
Recording on this side is no longer possible. To record over this side again, cover the tabs with a piece of adhesive tape.
RECORDING
English
SYNCHRO START CD RECORDING
1.Select CD source.
2.Insert a CD and if desired, programme track numbers.
3.Press STOP•OPEN 9/ to open the cassette door.
4.Insert a suitable cassette into the cassette deck and close the cassette door.
5.Press RECORD 0 to start recording.
–Playing of the CD programme starts automatically from the beginning of the programme. It is not necessary to start the CD player separately.
PLAY•PAUSE
CD
PROGRAM
REPEAT
ALL
CD MODE
STOP
1 | 2 |
REMOTE
SENSOR
SEARCH
To select and record a particular passage within a track
•Press and hold down SEARCH ∞ or § (or on the remote control 5 or 6).
•When you recognize the passage you want, release SEARCH ∞ or § (or on the remote control 5 or 6).
•To pause CD playback press PLAY/PAUSE 2;.
•Recording will begin from this exact point in the track when you press RECORD 0.
6.For brief interruptions during recording press PAUSE ;. To resume recording, press PAUSE ; again.
7.To stop recording, press STOP•OPEN 9/.
PLAY•PAUSE
CD
PROGRAM
REPEAT
ALL
CD MODE
STOP
REMOTE
SENSOR
SEARCH
PROGRAM
11
