Philips AZ1839 USB Connection, The system will not play or support the following, Helpful hints

USB Connection

The system will not play or support the following:

•Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display.

•Non-supported file formats are skipped. This means that e.g.: Word documents .doc or MP3 files with extension. dlf are ignored and will not be played.

•AAC, WAV, PCM. NTFS audio files

•DRM protected WMA files

•WMA files in Lossless format

Playing a USB mass storage device

1Make sure that your AZ1839 is being pow- ered by AC mains or specified batteries.

2Adjust the source selector to CD/USB.

3Press CD/USB once or more to enter the USB mode.

➜Display shows - - - .

4Plug a compatible USB mass storage device

to AZ1839’s USB port marked . If needed, use a suitable USB cable to connect between the device and AZ1839’s USB port.

➜The device will automatically power on.

• If the device is not powered on, turn on the power manually, then re-connnect it.

➜AZ1839’s display shows - - - and then the total number of playable audio files (Max. displayed track number is 511) stored on the device.

5Press 2; on your AZ1839 to start play.

➜AZ1839’s display will show the current track number.

Helpful hints:

–Up to 511 playable audio files stored on a USB mass storage device can be played on AZ1839.

–Up to 99 playable albums stored on a USB mass storage device can be selected and displayed on AZ1839.

–Make sure that file names of MP3 files end with .mp3. and the file names of WMA files end with .wma.

–For DRM protected WMA files, use Windows Media Player 10 (or later) for conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).

–For USB device playing, if the display shows "OL", it means that the USB device is electrically overloading AZ1839.You need to change a USB device.