Philips AZ1846 user manual General Operation Tuner, General operation

General Operation Tuner

General operation

Switching on and off and selecting the function

1To switch on the set, press POWER ON/OFF on the system.

2To select your sound source, press SOURCE on the front panel of the system or the respective source buttons on the remote control: CD,TUNER, MP3 LINK or USB.

3To switch off the set, press POWER ON/OFF on the system.

Adjusting volume and sound

•To adjust the volume, press VOLUME+/- on the system (or VOL+/- on the remote control).

•Press DBB on the system or on the remote con- trol to turn on or off bass enhancement.

•Press MAX SOUND on the system (or MAX on the remote control) to optimize the sound output.

•Connect a headphone to the ; jack on the rear of the system.

•Press MUTE on the remote control to temporarily switch off the sound of the system. Press the same button again to resume.

Digital Tuner

Tuning to radio stations

1Press SOURCE on the system repeatedly or press TUNER on the remote control to select the TUNER (MW or FM) source.

2Press and hold TUNING +/ - on the system (or § / ∞ on the remote control) until the display shows SEARCH.

➜The radio automatically tunes to a station of sufficient reception.

3Repeat step 2 if necessary until you find the desired station.

•To tune to a weak station, press TUNING +/ - on the system (or § / ∞ on the remote control) briefly and repeatedly until you have found optimal reception.

To improve radio reception:

•For FM, extend, incline and turn the telescopic aerial. Reduce its length if the signal is too strong.

•For MW, the set uses a built-in aerial. Direct this aerial by turning the whole set.

Programming radio stations

You can store up to a total of 40 radio stations in the memory, manually or automatically (Autostore).

Manual programming

1Tune to your desired station (see Tuning to radio stations).

2Press PROG to activate programming.

3Press ALB -/+ (or ALBUM/PRESET 3/4 on the remote control) once or more to allocate a number from 1 to 40.

4Press PROG to confirm.

5Repeat steps 1-4 to store other stations. Helpful hints: You can erase a preset station by

storing another frequency in its place.

Autostore

Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.

1Select MW or FM.

2Press and hold PROG until displays.

➜A total number of 40 available stations are programmed (MW and FM). After all stations are stored, the first autostore preset station will then automatically play.

• Press 9 once to stop auto-store.

To listen to a preset or autostore station Press ALB -/+ (or ALBUM/PRESET 3/4 on the remote control) once or more until the desired preset station is displayed.