Philips AZ1846 user manual Programming track numbers, Different play modes REPEAT. and SHUFFLE See

MP3/WMA/CD Player

Programming track numbers

You may store up to 40 tracks in the desired sequence. If you like, store any track more than once.

1In the stop position, press ∞ or § to select your desired track number.

For MP3-CD: first press ALB -/+ (or ALBUM/PRESET 3/4 on the remote control) once or more to find your album.

2Press PROG.

➜P01 will flash on the display panel.l. (See

5).

3Repeat steps 1-2 to select and store all desired tracks.

•Display: if you try to program more than 40 tracks.

Erasing a programme

You can erase the contents of the memory by :

•opening the CD door;

•selecting TUNER, MP3 LINK or USB sound sources;

•pressing 9 twice during playback or once in the stop position.

➜ Display shows CLEAR.

Different play modes: REPEAT. and SHUFFLE (See 6, 7)

You can select and change the various play modes before or during playback, and combine REPEAT modes with PROG (PRO- GRAM).

– plays the current track continuously

– repeats the entire CD/program.

– plays all tracks in random order.

– plays all tracks repeatedly in random order.

1To select play mode, press MODE on the system once or more (or the REPEAT or SHUFFLE buttons on the remote control).

➜ The display shows the related icon.

2Press 2; to start playback if in the stop/pause position.

3To return to normal playback, press MODE on the system (or the REPEAT or SHUFFLE buttons on the remote control) repeatedly until the modes are no longer displayed.

–You can also press 9 to cancel your play mode.

•Press SHUFFLE in the stop mode to start automatic playback in random order.

CD Ripping

This function enables you to record music to a connected USB mass storage device from the CD sound source without interrupting your enjoyment of the music.

1Insert a USB mass device with sufficient free

space to AZ1846’s USB port marked .

2Select the CD source and then load a CD onto the set.

3Select a track where ripping will start.

4Press USB REC to start ripping.

➜“IP onE” scrolls and “REC” flashes.

➜Ripping stops at the end of track playback.

➜The selected track(s) is (are) saved to the USB device.

•In the CD mode, to record all tracks starting from the one you selected, press USB REC again.

➜“IP ALL” scrolls.Then “ALL” and “REC” start flashing.

5At any moment, simply press 9 to stop rip- ping.

To delete a track/album from your USB mass storage device

1Plug in the USB mass device.

2Select the track to be deleted during play- back.

3Press and hold 9 on the system for more than 2 seconds or press DEL on the remote control.

➜“DEL” starts flashing on the display panel. 4 Press 9 on the system or DEL on the remote control to confirm the deletion.

• To stop deletion, wait for the system to quit automatically without pressing any key.