USB PC LINK

USB PC LINK

 

MAINTENANCE & SAFETY

USB PC LINK

Quick Setup Guide

PC system requirements

USB port with Windows 98 SE / ME/ 2000/ XP

Intel Pentium MMXX200 or higher

CD-ROM drive

Installing MusicMatch software

USB PC LINK installer disc 7.1 (for Windows 98SE/ME/2000/XP) :

1.Use the supplied USB cable to connect the set to the USB port on your computer. (See C)

2.Press Source selector (USB on the remote control) once or more to select USB PC LINK.

3.Turn on your PC then insert the supplied USB PC LINK installer disc in the PC's CD-ROM drive. This application software can also be downloaded from http://www.audio.philips.com.

IMPORTANT!

Please use this customized MusicMatch software for your USB PC Link application. Remember to un-install all other MusicMatch jukebox software first from your PC system (if available).

4.The installation guide will appear automatically. If it does not, go to the CD-ROM drive in Windows Explorer and double click on the USB PC LINK.exe. Then perform the following steps:

Select your desired language from the list.

Select & install installer driver.

Select & install installer MusicMatch jukebox.

For Windows 98 SE only

– While installing the installer driver, insert

Windows 98 SE setup disc as prompted by your PC.

– After the installer driver is successfully installed,

eject the Windows SE setup disc and restart your

computer as prompted.

– Insert the supplied USB PC LINK installer disc again.

– Proceed to the installation of installer

5.Launch MUSICMATCH JUKEBOX and create your own playlist of favorite songs by dragging and dropping the music track from anywhere on your PC into the playlist window.

Helpful Hints:

--If you encounter any problem using the USB PC LINK, please refer to the FAQ (Frequently Asked Questions) stored in your USB PC LINK installer disc or visit www.audio.philips.com for the latest FAQ updates .

After setup, refer to "Connecting to USB PC Link" for details on the USB PC LINK operations.

Enable digital CD audio output

Before playing CDs on your PC’s CD-ROM drive, it is necessary to configure your PC’s hardware as follows

1.For Windows ME/2000/XP

Enter the system control panel menu and select : ‘Sounds and Multimedia’, ‘Hardware’ tab, CD- ROM drive, ‘Properties’ button, ‘Properties’ tab.

For Windows 98SE

Enter the system control menu and select : ‘Multimedia’, ‘CD Music’ tab.

2.Check the Enable digital CD audio for this CD- ROM device setting option is selected (enabled).

Connecting to USB PC Link (See 9)

The USB PC LINK allows you to playback your music col- lection from the PC via the powerful amplifier and speak- ers of this set.

IMPORTANT!

Make sure the MusicMatch software has been installed.

1.Turn on your set and computer .

] Check your PC volume is suitably adjusted and not set to minimum / mute.

2.Press Source selector (USB on the remote con- trol) once or more to select USB PC LINK .

3.If correctly connected your PC will automatically launch MUSICMATCH JUKEBOX.

] If the audio streaming is detected, the current track name scrolls .

] If scrolls for a while, check the connection between your PC and set.

4.If necessary, press ∞ or § until the desired track name scrolls (or press ¡ or ™ on the remote con- trol to select/highlight your desired track in the playlist window of PC).

] It takes a few seconds to skip to your desired track.

] The track time appears and the track name scrolls once.

] Playback starts from the current

track automatically. The elapsed playing time appears and the track name scrolls once.

Helpful Hints:

The display only supports English characters in uppercase.

5.During playback,

Press SHUFFLE on the remote control to play all available tracks in the playlist in random order.

Press REPEAT on the remote control to repeat playback all the tracks in the playlist.

6.To cancel play modes/ stop playback, press 9 or select another sound sources.

MAINTENANCE & SAFETY (See 0)

CD player and disc handling

If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair.

The lens of the CD player should never be touched!

Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.

Always close the CD door to avoid dust on the lens.

To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc.

Never write on a CD or attach any stickers to it.

Safety Information

Don’t expose the set, batteries, or CDs to humidity, rain, sand or excessive heat.

To clean the set with a dry cloth. Don’t use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the set.

Place the set on a hard and flat surface so that the system does not tilt. Make sure there is good ventilation to prevent the set overheating.

The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated.

Apparatus shall not be exposed to dripping or splashing.

Do not place any sources of danger on the appara- tus (e.g. liquid filled objects, lighted candles)

MusicMatch jukebox and others.

Environmental information

We have done our best to reduce the packaging and make it easy to separate into 3 materials:cardboard,

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

expandable polystyrene, polyethylene.

Your set consists of materials which can be recycled if disassembled by a specialized company. Please

observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment.

Page 8
Image 8
Philips AZ2538 warranty USB PC Link