Selecting a different track
•Press ∞ / § once or repeatedly until the desired track number appears in the display. For
•In the pause/stop position, press 2; to start playback.
Finding a passage within a track
1During playback, press and hold ∞ or § .
➜The CD is played at high speed and with reduced volume.
2When you recognize the passage you want, release ∞ or § to resume normal playback.
Helpful hints:
–When your searching reaches the end of the last track, the CD goes to stop mode.
Helpful hints :
–When playback of your program comes to the stop position, your set will return to normal playback. To
Reviewing the program
In the stop position, press PROG repeatedly to see your stored tracks.
Erasing a program
You can erase the contents of the memory by:
–in the stop position, press PROG to enter program mode, and then press 9.
–selecting FM, MW or OFF;
–opening the CD door;
Programming track numbers
You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.
1In the stop position, press PROG to activate programming.
➜ Display: PROG and 00 flash. (See 5)
2Press ∞ or § to select your desired track number.
3Press PROG to store the desired track number.
➜Display: PROG and 00 flash for you to program the next track.
4Repeat steps 2 to 3 to select and store all desired tracks in this way.
➜If you attempt to store more than 20 tracks, no track can be selected and the display shows
5To play your program, press 2/;.
Different play modes: REPEAT. and SHUFFLE (See 6, 7)
You can play the current track or the whole disc repeatedly, and combine REPEAT modes with PROG (PROGRAM).
– plays the current track continuously.
– repeats the entire CD/program.
For MP3:
ALB
– plays all tracks in random order.
1To select play mode, press MODE once or more.
➜ The display shows the related icon.
2Press 2; to start playback if in the stop/ pause position.
3To return to normal playback, press MODE repeatedly until the modes are no longer displayed.
– You can also press 9 to cancel your play mode.
