CASSETTE RECORDER
RECORDING FROM THE RADIO
1.Set the source selector to FM or MW.
2.Tune to the desired radio station using the TUNING knob.
3.Press 9 / to open the cassette holder.
4.Insert a blank tape.
5.Press 0 to start recording.
6.For brief interruptions, press ;. To resume recording, press ; again.
7.To stop recording, press 9 /.
English |
SYNCHRO START CD RECORDING
1.Set the source selector to CD•VCD.
2.Insert a CD and if desired, programme track numbers.
3.Press 9 / to open the cassette holder.
4.Insert a blank cassette.
5.Press 0 to start recording.
™Playing of the CD programme starts automatically from the beginning of the programme.
6.For brief interruptions, press ;. To resume recording, press ; again.
7.To stop recording press 9 /
To select and record a particular passage within a track
1.Press and hold ∞ or § on the set to select a passage.
2.Put the CD player in ; position at the selected passage.
™ Recording will start from this exact point when you press 0.
3.Press 2; to start recording.
TAPE DECK MAINTENANCE
To ensure a good recording and playback of the tape deck, clean
parts A,B and C show in the diagram below, after approx. 50 hours of operation, or on average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck.
•Open the cassette holder by pressing 9 /.
•Press 1 and clean the rubber pressure rollers C.
•Press ; and clean the magnetic heads A and also the capstans B.
•After cleaning, press 9 /.
C B A | A |
Cleaning of the heads can also be done by playing a cleaning cassette through once.
19
