CASSETTE RECORDER
CASSETTE PLAYBACK
English
1.Set the source selector to TAPE/OFF.
2.Press 9 / to open the cassette holder.
3.Insert a recorded cassette.
4.Press 1 and playback will start.
5.Adjust the sound using the VOLUME and DBB controls.
6.For brief interruptions, press ;. Press ; again to resume playback.
7.By pressing 5 or 6,fast winding of the tape is possible in both directions.
8.To stop playback, press 9 /
™ The keys are automatically released at the end of the tape.
9.Set the source selector to TAPE/OFF position (with the cassette keys released) to switch off the set.
2 |
33 |
22 |
90 |
Å |
Note : - During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE mode ; has been activated.)
-During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released.
CASSETTE RECORDING
General information on cassette recording
• Recording is permissible insofar as copyright or other rights of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should
1
use NORMAL type cassettes (IEC I) on which the tabs have not been broken.
• Check and tighten slack tape before use with a pencil to avoid jamming the deck machanism.
• The recording level is set automatically.
Note : - No recording will take place during the 7 seconds in the beginning of the tape.
•To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in front of you and break out the left tab. Recording on this side is no longer possible.
The making of unauthorized copies of
This equipment should not be used for such purposes.
18
