English
DIGITAL TUNER
7
Tuning to radio stations
1.Select TUNER source.
is displayed briefly and then the radio station
frequency is shown.
2.Press BAND once or more to select your waveband.
3.Press SEARCH or §(on the remote control, TUNING
or §) and release when the frequency in the display starts
running.
The tuner automatically tunes to a station of sufficient
reception. Display shows during automatic tuning.
If an FM station is received in stereo, STEREOis shown.
4.Repeat step 3if necessary until you find the desired station.
• To tune to a weak station, press SEARCHor §briefly and
repeatedly until you have found optimal reception.
To improve radio reception:
• For FM, pull out the telescopic aerial.
Incline and turn the aerial. Reduce its length if the signal is
too strong (very close to a transmitter).
• For MW (AM or LW), the set is provided with a built-in aerial
so the telescopic aerial is not needed. Direct the aerial by
turning the whole set.
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1.Tune to your desired station (see Tuning to radio stations).
2.Press PROG to activate programming.
Display: PROGflashes.
3.Press PRESET 3or 4once or more to allocate a number
from 1 to 30 to this station.
4.Press PROG again to confirm the setting.
Display: PROGdisappears, the preset number and the frequency
of the preset station are shown.
5.Repeat the above four steps to store other stations.
• You can overwrite a preset station by storing another
frequency in its place.
Tuning to preset stations
Press TUNER PRESET4or 3until the desired preset station is
displayed.
AZ 1575/00 page7
AZ 1575
CD RADIO CASSETTE RECORDER
O
P
E
STOPPLAYPAUSETUNERPRESET
PROG
SHUFFLEREPEAT
SEARCH
BAND
SOUND CONTROL CENTER
REMOTE
SENSOR
FM
AM
BAT
LOW
LW
PROG
STEREO
SHUFFLE
VOL
AZ 1575
CD RADIO CASSETTE RECORDER
O
P
E
STOPPLAYPAUSETUNERPRESET
PROG
SHUFFLEREPEAT
SEARCH
BAND
SOUND CONTROL CENTER
REMOTE
SENSOR
FM
AM
BAT
LOW
LW
PROG
SHUFFLE
VOL
AZ15750A 15-12-2000 18:35 Pagina 7