RADIO

Radio play

English

You can tune to any FM or MW station automatically or manually. Stereo stations are indicated by ST.

1Press RADIO·BAND to switch the radio on.

2Press RADIO·BAND if necessary repeatedly to select the desired waveband.

y FM 1, FM 2, FM 3, FM 4 or MW is shown.

· ET

K

PROGRAM

RADIO·BAND

Tuning to radio stations automatically

1Keep 3 or 4 pressed for at least 1 second.

y The radio tunes to a station with sufficient strength and radio play starts.

A (for “automatic search”) and the current waveband and frequency are displayed.

2Repeat searching until you find the desired radio station.

Tuning to radio stations manually

1Keep 3 or 4 pressed.

2Release 3 or 4, then briefly press 3 or 4 again when you are close to the desired frequency.

3Briefly press 3 or 4 repeatedly until you reach the

desired frequency.

y Radio play starts. The current waveband and frequency are displayed.

To switch from radio play to CD play press 2;.

Press 9 to switch the radio off.

Note: In case of interferences in stereo mode press ·MODE to switch to mono.

20

Page 20
Image 20
Philips AZT9230 Radio play, Tuning to radio stations automatically, Tuning to radio stations manually