1.1 Purpose
This document describes how to operate the BDS Monitor Series, using the IR remote
control unit (using standard Philips RC5 code) and the RS-232 Serial Communication
Interface. This document defines all the command and messages exchanged between
the master and the slave monitors for BDS. It also describes the ways to send or read
the commands or the messages.
1.2 Scope
This document is the reference for design, implementation and testing the RC and
RS232 communication module for Philips BDS project.
1.3 Definitions, Abbreviations and Acronyms
SICP stands for “Serial Interface Communication Protocol”.
1.4 References
2838 100 05424
[
NAME
]
Philips
04
140
23
Downloaded From TV-Manual.com Manuals