Philips BDP5012/F7 manual 35

LIST OF SETTINGS

	Category		Menus/Options				Description
	Audio	Analog Audio	Speaker Setup	Front (L/R)	Large/Small		Sets the speaker configuration to
		• When HDMI cable is	• Refer to page 41	Center	Large/Small/Off		match the size/number of your
		connected, make	for more				speakers.
				Surround (L/R)	Large/Small/Off
		sure “HDMI Audio”	information.				• You can also output the test tone
		setting is set to “Off”		Subwoofer	On/Off		from each speaker by pressing
		to change the					[RED].
		“Analog Audio”	Speaker Distance	Unit	Feet		Sets the desired measure system.
		setting.			Meters		This measure system will be used for
							“Speaker Distance” setting.
				Front (L/R)	0-60 ft	default	Select the distance from the listening
						is 10 ft	point to the speaker to get the ideal
							delay time.
				Center	5-10 ft	default
						is 10 ft
				Surround	0-10 ft	default
						is 10 ft
				Default	Yes/No	default
						is “No”
			Speaker Level	Front (L)			Sets the volume level for each
				Center			speaker to get the ideal audio
							balance.
				Front (R)	0-12 dB	default
				Subwoofer		is 0 dB
				Surround (R)
				Surround (L)
	Ratings Lock	Rating Level	All				Sets the rating level for the disc
	• Refer to		8 [Adult]				playback.
	page 41 for		to
	more		1 [Kid Safe]
	information.
		New PIN					Sets the new password for the
Setup							“Ratings Lock” setting.
	Others	Angle Icon	On				“On”:
			Off				The angle icon automatically
Advanced							appears on the TV screen when
							playing back content with various
							camera angles available.
							“Off”:
							The angle icon does not
							automatically appear on the TV
							screen when playing back content
							with various camera angles available.
		Auto Standby	On				Sets whether to turn off the unit (to
							the standby mode) automatically
			Off
							after 25 minutes of no action since
							the screen saver is activated.
							• If the screen saver is off, the unit
							will be turned off after 30 minutes
							if no action.
		Front Panel Brightness	Bright				Sets the brightness of the front panel
			Dim				display.
							When “Auto” is selected, the front
			Auto
							panel display automatically goes dim
							during playback.
		Screen Saver	On				Sets whether to activate the screen
			Off				saver after 5 minutes of no action on
							the unit.
		Slide Show	Slide Show Interval	5sec			Sets the amount of time for
				10sec			displaying one picture before
							switching to the next one.
							For example, select “5sec” to switch
							the picture every 5 seconds.
			Slide Show	Cut In/Out			Sets the visual effect for the slide
			Transition	Fade In/Out			show transition mode.
							“Cut In/Out”:
							The pictures will cut in and out
							sharply as playback progresses.
							“Fade In/Out”:
							The pictures will fade in and out as
							playback progresses.

Others Setup Function PlaybackSetup Basic Connections Introduction

EN 35