Outdoor Charcoal Grill Model No. CBC608A

Assembly Instructions

DO NOT RETURN PRODUCT TO STORE.

For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference.

For Easiest Assembly:

•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.

•Clear an area large enough to layout all components and hardware.

•When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware.

•Follow all steps in order to properly assemble your product.

Step Attach plastic feet

1Insert 2 plastic feet into left cart frame.

Step Assemble frame

2A. Attach left and right side frames to link beams using 4 sets of extra large screws (E), large lock washers (N), and large washers (K).

B.Attach wheels to right cart frame using wheel axle and 2 sets of rubber spacers (Q), and nuts (F).

C.Snap hub caps onto wheels.

Step Attach front panel and bottom grid

A. Slide front panel into clips on inside of front legs. Fasten with 2 sets of medium

3

screws (C), large lock washers (N), and large washers (K).

B. Place bottom shelf onto link beams.

 

Step Attach side shelves

4Attach side shelves to cart frame using 4 sets of medium screws (C), large lock washers (N), and large washer (K).

Step Attach control panel

5Attach control panel to cart fram using 2 sets of medium screw (C), large lock washer (N) and large washer (K).

Note: image is shown from back.

Step Attach lid handle and air vent assembly

6

A. Attach lid handle to lid using 2 sets of heat resistant washers (L), large washers

(K), large lock washers (N), large wing nuts (I).

B. Attach air vent assembly to lid using small screw (B), small lock washer (M) and

small wing nut (H).