Glossary | Philips CCC 133AT, CCC 193AT instruction

56 Glossary

AUDIO In Jack: jack on the front of the TV/VCR which is used to receive or record audio from another source.

Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) o/p buttons, you only scan through channels you receive.

Bands: settings that allow you to tune channels.

•Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69).

•Cable – all standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on the screen.

Color: adjusting pales or brightens the TV/VCR color.

Dubbing: copying a tape using a VCR.

HQ: high quality; a feature in the TV/VCR circuitry which pro- vides enhanced picture detail.

Line Input: The channel to which you set your TV/VCR during dubbing or when you want to watch material from other equip- ment that is connected to the TV/VCR. The line input channel is always channel 00 (A/V IN).

Mode: a TV/VCR operation.

OTR: One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichev- er you specify.

Picture: adjusting increases or decreases the contrast of the pic- ture on the screen.

Sharpness: adjusting softens or clarifies the picture on the screen.

Tape Speeds: how fast the tape travels during playback or recording.

•SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours); best picture quality.

•LP (long play) – average tape speed; playback only.

•SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).

Tint: adjusting changes the tints of the picture on the TV/VCR from purple to green.

VIDEO In Jack: jack on the front of the TV/VCR which is used to receive or record video from another source.

Image 56

Philips CCC 133AT, CCC 193AT owner manual Glossary

Contents

Color TV with built-in VCR Dear Philips product owner For Customer UseThis bolt of lightning indi- cates uninsulated material Model No Serial No Features Safety PrecautionsReal-Time Counter Frame Advance Remote Control Introduction Table of Contents Battery Safety Using the Remote ControlTV/VCR Maintenance Replace the battery compartment lid Hook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRF coaxial cable Not supplied Rod Antenna Hooking Up the TV/VCR cont’d Bent pinCrooked Pin Straight Pin Cable Plug Press the Menu button. The screen shown below will appear You cannot set up channels if you are using a Cable BoxTurning On the TV/VCR Press the STATUS/EXIT button Language SelectionPress the Menu button Automatic Channel Setup Wait for the TV/VCR to set up channels Adding/Deleting Channels Press the PLAY/o button or the STOP/p button to selectRepeat steps 3-4 to add or delete other channels Programming of the channel you added or deleted will appear Setting the Clock Manual Clock SettingCable Box users must set the clock manually Pages six-eight Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel Selection NOW Searching flashes on the TV/VCR screen Wait for the TV/VCR to find the time Manual PBS Channel Selection Use the Number buttons to select your PBS station Press the PLAY/ button or the STOP/ button to select PRIM. SETUP. Then, press the F.FWD/ B buttonDaylight-Savings Time Time Zone Front Panel AC Power Cord Rear PanelANTenna Jack Connect your antenna or cable here. Details are on page six Remote Control Buttons Menu Button STATUS/EXIT ButtonREWind/ Button STOP/ Button Adjusting the Picture Controls Decreased brightness Adjusting the Picture Controls cont’dDecrease Increase On-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFF Reminder Reminder Insert a tape in the TV/VCR PlayingFollow the steps below to play a tape Recording To stop recording, press the STOP/ button Tape Speeds One-Touch Recording You cannot record if Defeat Recording is ON. Details are on TV/VCR is now in Line Input mode Rerecording Tape Duplication Timer Recording Daily Timer Recording cont’d Timer Recording cont’d Timer recording information for the program in the lowest With the TV/VCR on, press the Menu buttonProgram REVIEW, then press the F.FWD/B button Gram Review and press the F.FWD/B button Defeat Recording Follow the steps below to prevent accidental recording TV programming will appear while the tape is rewinding VCR SETUP, then press the F.FWD/B buttonRepeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu button Repeat Play cont’d Real-Time Counter Memory Appear on the screen Forward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPViewing a Still Picture Viewing a Slow Motion Picture Smartlock menu will appear SmartLockTo block ratings, follow the steps below Ratings will remain blocked even after a power failure SmartLock cont’dRatings are defined on Example Specific Sub-ratings To change the access code, follow these steps Use the Number buttons to enter your old access code Rating Explanations VCR Program VCR Setup Caption Reminder Blue Background Sleep Timer Press the SLEEP/WAKE UP buttonSLEEP. Then press the REWind/s button or FWD/B button to select 30 MINutes, 60 MINutes Wake Up Timer Timer Sleep Wake UP TV on ON-TIME Volume Bar Cast with closed captions, you may choose to set the Volume Menu Screen Closed CaptionExample Half-screen text Closed Caption cont’dStandard Closed Captions Switching the Antennas FM Radio Automatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Specifications Renewed Index Supplied Accessories