Philips CCZ191AT, CCZ192AT owner manual Real-Time Counter Memory, Appear on-screen

CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 44

44 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2

Press the STATUS/EXIT button. The real-time counter will

appear on-screen.

01:08 PM	STOP
CH10

SLP 1 : 23 : 45

3

While the counter remains on-screen, press the CLEAR button to reset the real-time counter to zero.

4

2

	POWER			SLEEP
		2	3	ALT.CH
	1
	4	5	6	o
				CHANNEL
	7	8	9	p
		0	+100	o
	SPEED		MUTE	VOLUME
				p
		o
		PLAY
o	REW			F.FWD	o
		STOP
		p
	REC/OTR	MEMORY	PAUSE/STILL
				o
	MENU	STATUS/EXIT	CLEAR	TRACKING

p

1,5

3

0 : 00 : 00

4

While the counter remains on-screen, press the MEMO- RY button so that M appears on-screen. To erase a real- time counter memory, press the MEMORY button so that the M disappears from the screen.

M 0 : 00 : 00

5

To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/s button or the F.FWD/ B button when playback is stopped. When the tape reaches the point at which the counter was set to zero, the tape will stop. Press the PLAY/▲ button to watch the tape.

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 41.

•You may only set one real-time counter memory at a time. If you try to set the real-time counter to zero at a second location, the previ- ous real-time counter to zero setting will be lost.