Appears, Set-up Caller ID does not work properly | Philips CD140

•Use the line cable provided

•Connect the line adaptor (when needed) to the line cord

The	is blinking.

•Move closer to the base station

•Check battery level

•Register the handset to the base station

The appears.

•Replace the batteries with new ones (use only rechargeable batteries)

Set-up

Caller ID does not work properly.

•Check with your local phone company that the CID service is subscribed to

•Let the phone ring at least once before answering

The Call Waiting call cannot be answered.

•Check with your local phone company and select the correct recall duration

The handset displays nothing, but only the is blinking.

•Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see Section 3.5)

•Remove and place back the handset batteries

Sound

Handset does not ring!

•Increase the volume

•Make sure that the adaptor and the phone cord are connected properly

•Move the handset closer to the base unit

•Make sure the handset ringer

is turned on ( is not displayed on the LCD)

26	Frequently asked questions

Image 28

Philips CD140 manual Appears, Set-up Caller ID does not work properly, Call Waiting call cannot be answered

Contents

CD140 EN Digital Cordless TelephonePage Table of contents Power requirements Easily accessible Use one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Using GAP standard Compliance Electric, Magnetic and Electromagnetic Fields EMFPage What’s in the box Telephone handset Base stationLine cord Batteries Overview of the phone Handset ACall Log key Phonebook keyTalk key Redial/Flash key Alphanumeric keypad GStar key HHash keyCall Transfer / Intercom Conference Program key Display icons on the handset Base station Key Getting started Connect the base Station Slide out the battery cover Install rechargeable BatteriesStation When the handset is fully Charged Configure your Phone Tip Register your handset Make a call Predialling Call is initiatedDirect dialling Call from the call log How to make a second call During a call How to answer a Second callCall from the redial list End a call How to use Intercom How to make an Internal call During the conference call 1 Press to put How to find a handsetExternal call is put on hold automatically How to adjust earpiece volume During a call Call in progress Mute/Unmute microphone During a callIs shown on the display Number is saved Selected memory location How to access the phonebook Idle mode How to edit the phonebook entry or Delete a numberHow to delete Entire phonebook All the phonebook entries are deleted How to access Call log How to delete the entire call logHow to access Redial list Settings How to set the time How to set the ring volume How to setHow to activate/deactivate Keypad lock How to select recall time How to select dial mode Current settings are displayedHow to turn On/turn off the key tone How to set the auto prefix How to program voice mailbox Number How to access your voice mail numberHow to restore to default settings Your phone is reset to its default settings Default settings Items Default values Connection Handset does not switch on Phone does not work at allCommunication is lost during a call Poor audio quality Appears Set-up Caller ID does not work properlyCall Waiting call cannot be answered Handset displays nothing, but only the is blinking Caller does not hear me Noise interference on your radio or televisionPhonebook entry cannot be stored Handset is unable to registerPage