9 Advanced settings
9.1Change Master PIN
The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.
Note
The default pin code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.
1 Press m key in idle mode, scroll :to ADVANCED SET and press <OK, scroll : to CHANGE PIN and press <OK.
2Enter the Master PIN when prompted and press <OK to confirm.
• The PIN entered will be shown as
asterisks (*) on the screen.
3Enter the new PIN and press <OK to confirm.
•A validation tone is emitted and the screen returns to previous menu.
Tip
If you forget your PIN, you will need to reset your phone to its default settings. See “Reset unit” on chapter 9.4 for more details.
9.2Registration
The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 4 handsets can be registered to one base station.
1Insert battery to power up the handset. The LCD displays "PRESS
OK KEY TO REGISTER".
2Press <OK on handset, the LCD displays "HOLD LOCATOR KEY
DURING 5s".
3Within 5 minutes, press the locator
key on base station to start registration.
4If registration succeeds, the handset returns to idle mode.
5 If registration fails, the LCD will display "PRESS OK KEY TO REGISTER". Repeat the process again.
9.3 Unregister
1 Press m key in idle mode, scroll :to ADVANCED SET and press <OK, scroll : to UNREGISTER and press <OK.
2 Scroll :to select the handset number to unregister and press <OK.
• A validation tone is emitted to indicate successful unregistration and the screen returns to previous menu.
Advanced settings | 31 |
