Philips CD196 Change the remote access PIN code, Set the country/language, Set the date and time

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Use only the supplied batteries.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are being charged, it is normal.

Warning

•• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product.

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Configure your phone (country dependent)

1 When using your phone for the first time, you see a welcome message.

2 Press MENU/OK.

Set the country/language

Select your country/language, then press MENU/OK to confirm.

»»The country/language setting is saved.

Note

•• The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country.Then you can set the date and time.

To re-set the language, see the following steps.

1 Select [Menu] > [Phone setup] > [Language], then press MENU/OK to confirm.

2 Select a language, then press MENU/OK to confirm.

»»The setting is saved.

Set the date and time

Tip

•• To set the date and time later, press REDIAL/C to skip this setting.

1 Press MENU/OK.

2 Select [Phone setup] > [Date & time],

then press MENU/OK to confirm.

3 Press the numeric buttons to enter the date, then press MENU/OK to confirm.

»»The time setting menu is displayed on the handset.

4 Press the numeric buttons to enter the time.

• If the time is in 12-hour format, press

/ to select [AM] or [PM]. 5 Press MENU/OK to confirm.

Change the remote access PIN code

Note

•• The default answering machine remote access PIN code is 0000 and it is important to change it to ensure the security.

EN 9