1 Press MENU/OK.
2 Select [Answ. Machine] > [Remote
access] > [Change PIN], then press
MENU/OK to confirm.
3 Enter the old PIN, then press MENU/OK to confirm.
4 Enter the new PIN code, then press MENU/OK to confirm.
5 Enter the new PIN code again, then press MENU/OK to confirm.
»»The setting is saved.
Charge the handset
Place the handset on the base station to charge the handset.When the handset is placed correctly on the base station, you hear a docking sound.
»»The handset starts charging.
Note
•• Charge the batteries for 8 hours before first use.
•• If the handset becomes warm when the batteries are being charged, it is normal.
You can activate or deactivate the docking tone (see 'Set the docking tone' on page 21).
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery level.
When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low).
When the handset is on the base station/charger, the bars flash until charging completes.
The empty battery icon flashes. The battery is low and needs recharging.
The handset turns off if the batteries are empty. If you are on the phone, you hear warning tones when the batteries are almost empty.The call gets disconnected after the warning.
What is standby mode?
Your phone is in standby mode when it is idle. The standby screen displays the handset name, handset number, date and time.
10EN
