Philips CD280 Install the handset, Set the date and time, Charge the handset, Press OK to confirm

Install the handset

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Use only the supplied batteries.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

Warning

•• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product.

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Set the date and time

Tip Eng l i s h

•• To set the date and time later, press [Back] to skip this setting.

1 Select [Menu] > [Phone setup] > [Date & time], then press [OK] to confirm.

2 Press the numeric buttons to enter the date, then press [OK] to confirm.

»» The time setting menu is displayed on the handset.

3 Press the numeric buttons to enter the time.

Note

•• If the time is in 12-hour format, press / to select [AM] or [PM].

4 Press [OK] to confirm.

Charge the handset

Place the handset on the charging cradle to charge the handset.When the handset is placed correctly on the charging cradle, your hear a docking sound.

»» The handset starts charging.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are being charged, it is normal.

Your phone is now ready to use.

EN 9