Delete all old incoming messages
From the base
Press and hold 
in standby mode.
»» All old messages are permanently deleted.
From the handset | ||
1 | Select [Menu] > > [Delete all], then | |
| press [OK] to confirm. | |
| »» | The handset displays a confirmation |
2 |
| request. |
Press [OK] to confirm. | ||
| »» | All old messages are permanently |
|
| deleted. |
Note
•• You can delete the read messages only. No deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a message. Press 
to pick up the call.
From the base
Press 
/ 
to adjust the speaker volume during call screening. The lowest volume level turns off the call screening.
Set the sound quality of the message
You can adjust the sound quality of the messages received from the answering machine.
1
2
Note
•• The sound quality can only be adjusted before recording starts.
Set the ring delay
You can set the number of times the phone | lish | |
rings before the answering machine picks up | Eng | |
the call. |
| |
1 | Select [Menu] > > [Ring delay], then |
|
2 | press [OK] to confirm. |
|
Select a new setting, then press [OK] to |
| |
confirm.
»» The setting is saved.
Note
•• Ensure that the answering machine is switched on before this feature can be applied.
Tip
•• When you access the answering machine remotely, you are recommended to set the ring delay to[Toll saver] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your
Note
•• The remote access PIN code is the same as your system PIN. The preset PIN is 0000.
EN 39
