Philips CD495, CD490 Install the handset, Set the country/language, Set the date and time

Install the handset

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Use only the supplied batteries.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are charging, it is normal.

Warning

•• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product.

Configure your phone (country dependent)

1	When using your phone for the first time,
2	you see a welcome message.
	Press [OK].

Set the country/language

Select your country/language, then press [OK] to confirm.

»»The country/language setting is saved.

Note

•• The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country.Then you can set the date and time.

To re-set the language, see the following steps.

1	Select [Menu] > > [Language], then
2	press [OK] to confirm.
	Select a language, then press [OK] to
	confirm.

»»The setting is saved.

Set the date and time

1	Select [Menu] > > [Date & time], then
2	press [OK] to confirm.
	Select [Set date]/[Set time], then press
3	[OK] to confirm.
	Press the numeric buttons to enter the
	date and time.

Note

•• If the time is in 12-hour format, press to select [AM] or [PM].

4	Press [OK] to confirm.
Set the date and time format
1	Select [Menu] > H p > [Date & time],
2	then press [OK] to confirm.
	Select [Date format] or [Time format].
3	Press / to select [DD-MM-YYYY] or

[MM-DD-YYYY] as the date display, and [12 Hours] or [24 Hours] as the time display.Then press [OK] to confirm. »»The setting is saved.

English

EN 9