Philips CD495, CD490 Phone settings, Sound settings, Set the handsets ringtone, Silent mode

10 Phone settings

You can customize the settings to make it your own phone.

Sound settings

Set the handset's ringtone

You can select from 10 ringtones.

1	Select [Menu] > > [Sounds] > [Ring
2	Tone], then press [OK] to confirm.
	Select a ringtone, then press [OK] to
	confirm.

»»The setting is saved.

Set the handset's ringtone volume

You can select among 5 ringtone volume levels, [Progressive] or [Off].

1	Select [Menu] > > [Sounds] > [Ring
2	volume], then press [OK] to confirm.
	Select a volume level, then press [OK] to
	confirm.

»»The setting is saved.

Silent mode

You can set your phone to silent mode and enable it for a specific duration when you do not want to be disturbed.When the silent mode is turned on, your phone does not ring or send any alerts or sound.

Note

•• When you press to find your handset, or when you activate the alarm, your phone still sends alert even when the silent mode is activated.

1	Select [Menu] > > [Sounds] > [Silent
	mode], then press [OK] to confirm.	h
2	Select [On]/[Off], then press [OK] to	nglis
	confirm.	E
	»»The setting is saved.
3	Select [Start & end], then press [OK] to
4	confirm.
	Set the time, then press [OK] to confirm.
	»»The setting is saved.

Note

•• When the silent mode is set to [On], is displayed. is displayed during the preset time for the silent

mode.

Exclude the contacts from silent mode You can select the length of ring delay and set the contacts to be excluded from the phonebook. Ring delay is the number of rings that will be muted before the rings become audible on the phone.

1	Select [Menu] > > [Sounds] > [Silent
2	mode], then press [OK] to confirm.
	Select [Exception].
3	Select [On] to activate, or [Off] to
	deactivate the silent mode, then press [OK]
4	to confirm.
	Select [Ring delay], then select an option.
5	press [OK] to confirm.

»»The setting is saved.

Note

•• If [Exception] is set to [On] and [Ring delay] option is selected, the handset rings only after length of ring delay selected is reached.

•• Make sure that the contact under the [Set exception] option of the phonebook menu is set to [On] before you can exclude this contact from the silent mode.

EN 23