72 EN | INDEX Indications (cont.) | |
| Indications | Function |
●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder
( pg. 45)
| ● Appears in the following cases when dubbing from a tape to a | |
| MultiMediaCard: |
|
| – when no MultiMediaCard is loaded. |
|
| – when the MultiMediaCard's memory is full. | ( pg. 47) |
COPYING FAILED | – when the MultiMediaCard is not formatted. | |
●Appears in the following cases when dubbing still images stored in the MultiMediaCard’s memory to a tape:
–when condensation occurs.
–when no tape is loaded.
–when the erase protection tab is set to “SAVE”.
–when a tape in another format is loaded.
| – when the tape ends. | ( pg. 46) | |||
|
|
| |||
| Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed |
| |||
MEMORY CARD! | while the Power Switch is set to “ ” or “ ” and the VIDEO/DSC Switch | ||||
| is set to “ | ”. |
|
| |
|
| ||||
PLEASE | Appears when there is a problem with a MultiMediaCard and its memory is | ||||
corrupt, or it has not been initialised. Initialise the MultiMediaCard. |
| ||||
FORMAT |
| ||||
|
| ( pg. 39) | |||
|
|
| |||
|
|
| |||
NO STORED IMAGE | Appears if there are no images stored in the MultiMediaCard when the |
| |||
Power Switch is set to “ | ” and the VIDEO/DSC Switch is set to “ | ”. | |||
| |||||
|
|
| |||
E01 — E06 | The error indications (E01 — E06) show what type of malfunction has |
| |||
occured. When an error indication appears, the camcorder turns off |
| ||||
UNIT IN SAFEGUARD | automatically. Remove the power supply (battery, etc.) and wait a few |
| |||
MODE REMOVE AND |
| ||||
minutes for the indication to clear. When it does, you can resume using the | |||||
REATTACH BATTERY | |||||
camcorder. If the indication remains, consult your nearest JVC dealer. |
| ||||
|
| ||||
