JVC GR-DVL308, GR-DVL109, GR-DVL309, GR-DVL108 specifications Warning Indications, EN71, Function

EN71

Warning Indications

Indications		Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator			blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.		( pg. 10)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the Power
	Switch is set to “ ” or “ ” and the VIDEO/DSC Switch is set to
PROTECTION SWITCH
	“VIDEO”.		( pg. 10)
	Appears if dirt is detected on the heads. Use an optional cleaning cassette.
HEAD CLEANING			( pg. 75)
REQUIRED USE CLEAN-
ING CASSETTE
	Appears if condensation occurs. When this indication is displayed, wait
	more than 1 hour until condensation disappears.
CONDENSATION,
OPERATION PAUSED
PLEASE WAIT
	Appears if a tape is not loaded when the Recording Start/Stop Button or
TAPE!	SNAPSHOT Button is pressed while the Power Switch is set to “ ” or
	“ ” and the VIDEO/DSC Switch is set to “VIDEO”.
TAPE END	Appears when the tape ends during recording or playback.		( pg. 15)
DIFFERENT	Appears if a tape in another format is loaded.
FORMATTED TAPE
	● Appears when the date/time is not set.		( pg. 9)
SET DATE/TIME!	● Appears when the built-in clock battery runs out and the
	previously set date/time is erased. Consult your nearest JVC dealer
	for replacement.
LENS CAP	Appears for 5 seconds after power is turned on if the lens cap is attached.
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape.
			( pg. 58)
A. DUB ERROR!	● Appears if Audio Dubbing is attempted on a tape recorded in the LP
<CANNOT DUB	mode.		( pg. 58)
ON AN LP RECORDED	● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
TAPE>
	audio.		( pg. 58)
<CANNOT DUB
	● Appears if A. DUB (e) on the remote control is pressed when the erase
ON A 16BIT
	protection tab is set to “SAVE”.		( pg. 58)
RECORDING>
<CHECK TAPE’S ERASE
PROTECTION SWITCH>
MEMORY IS FULL	Appears when the MultiMediaCard’s memory is full and shooting is not
	possible.

CONTINUED ON NEXT PAGE