JVC GR-DVL309, GR-DVL109, GR-DVL108, GR-DVL308 specifications EN25

EN25

MANUAL MENU

DISPLAY MENU

DSC MENU

WIND	ON		Helps cut down on noise created by wind. “ ” appears. The quality of the
CUT			sound will change. This is normal.
	OFF		Disengages the function which cuts down on noise created by wind.
CAM	CANCEL		Does not reset all settings to the factory-preset.
RESET	EXECUTE		Resets all settings to the factory-preset.
ON	LCD		Keeps the camcorder’s display (except the date, time and time code) from
SCREEN			appearing on the connected TV screen.
	LCD/TV		Makes the camcorder’s display appear on screen when the camcorder is
			connected to a TV.
	SIMPLE		Keeps the indications (except the tape running indicator, warnings, date, time,
			time code, etc.) from appearing in the camcorder. Also keeps the camcorder’s
			display (except the date, time and time code) from appearing on the con-
			nected TV screen.
DATE/	ON		The date/time is always displayed.
TIME
	OFF		The date/time does not appear.
TIME	ON		Time code is displayed on the camcorder and on the connected TV. Frame
CODE			numbers are not displayed during recording.
	OFF		Time code is not displayed.
CLOCK	Allows you to set the current date and time ( pg. 9).
ADJ.
QUALITY	Allows you to set the Picture Quality mode (FINE and STANDARD) depending on your
	preference ( pg. 12).
REC			When Snapshot recording is performed with the VIDEO/DSC Switch set to
SELECT			“VIDEO”, still images are recorded only onto the tape.
		/	When Snapshot recording is performed with the VIDEO/DSC Switch set to
			“VIDEO”, still images are recorded not only onto the tape but also in the
			MultiMediaCard.

: Factory-preset

NOTES:

●The “MANUAL MENU” settings are effective only when the Power Switch is set to “ ”.

●“DISPLAY MENU” functions which are set when the Power Switch is set to “ ” are also applied when the

Power Switch is set to “ ” (  pg. 32). “CLOCK ADJ.” only appears when the Power Switch is set to “ ”.

●The “DISPLAY MENU” settings are effective even when the Power Switch is set to “ ”.

●The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control (provided) (  pg. 41, 44, 53).