ADDING RINSE AGENT
Rinse Agent
Rinse agent, or a rinse aid, is used to provide ap- timum drying results and diminish water spotting. Always use a rinse agent with the Kuppersbusch dishwasher to insure proper drying results. It rin- ses the dishwasher and also rinses the internal parts of the dishwasher.
Fa Fir! the Rinse A g e n t Resewair
1.Open the dishwasher door fully.
2.Open the cover of the rinse agent dispenser by pressing the star on the cover with your index finger- while pullins- on the tab with your thumb.
3.Add rinse agent to the reservoir until the level indicator turns dark, indicating that the reser- voir is full (capacity is approx..3.5 oz.).
4.Close lid until snaps shut.
TO AD3UST RINSE
AGEMT REGI,,IUTQIRSmxWG:
%.OPEN THE CQVER or;:WE RaiNse AGENT
DISPENSER.
INDICATOR 1"0THE
DESIRED SETTING
-
#eta: Re$li/$rinsel agent when
the level indicata~shaws a siflwer baekgraunld wim black Binas,
Rinse Agent
Dispenser Regulator
The Kuppersbusch Rinse Aid Dispenser Regulator is provided with a regulator calibratedfrom 4 to 6. (See Figure 16). This regulator controls the amount of rinse agent dispensed. The dishwasher leaves the factory preset to 4. However,
if you see streaks, you should turn the regulator to a lower number.
if you see water spots, you should turn the regulator to a higher number.
Rinse agent is avar'8ablein liirgaaid or soiiid farm. ClrpIgs use the !]quid type
of rhse agelrta in the K ~ W ~ F S ~ M S Q ~dishwashes=
Rinse Agent indicator Light
and Indicator Level
Kuppersbuschmodels are equipped with an addi- tional rinse aid indicator light on the control panel. When the rinse agent dispenser is empty, not only will the indicator levelshow a silver back- ground with black lines, but the indicator light
will also be illuminated. After filling the rinse
agent dispenser, close the door and wait a few Figure 18 minutesfor the indicator light to register.