INTERRB%PTPNGICHANGING OR
Cycle Interruption
As a safety feature the d~shwasherwlll automatically turn itself off whenever the door is opened. However, if the door is opened quickly while in a wash or rinse cycle some water may splash out of the dishwasher. For this reason ~tis recommended that you wait 10 seconds before opening the door.
CANCELLlrNG A CYCLE
WAFPNIWG
08 Nof BULLFULLY GtlPEN WHSELEDISHWA,SNER XS HMopemTraw. QUICKLY OPEN-DOOR BPSH-WAS HE^^;^ IS BPES;.S~ATI~NCQULD B2ESULT IN SERIOUSSCALDING.
I | To Interrupt a Cycle |
1. Press the on/off buMon to stop operation. | |
| 2. Walt at least 10 seconds (or unt~lthe water |
| noises stop) before opening the door, |
I | TQ Wesurne ;a cycle |
| |
| Push the on/off button and close the doar. |
1 Changing a Cycle
[ To change the cycle selection, press the program button of the desired cycle ONCE, The chosen cycle button (or the light above it) becomes illtr- rninateri, showing that i t has been selected,
|
|
| |
, | > | (1) |
|
ii |
|
|
|
1 | - | - | - |
Figure 23 |
| hi | |
I | Cancelling a Cycle | |
Each control panel shows whtch buttons to simulta- Figure 24 |
| |
neously push to cancel a cycle. Refer to your dish- |
| |
]I | washer to find the "Cancel Drain" buttons on your |
|
particular model. |
|
1
I
I
1.Open the dishwasher door. Press the indicated buttons at the same time and hold for approximately 3 seconds.
2.Close the door. When the drain pump nolses
stop, open. the door. I f the LED d~splays'0"
.. .
then the end of the cycle has been reached and the dishwasher is reset.
3.Turn dishwasher off (push the On/Off
button.
4.The dishwasher is now ready to run a selected cycle. Add more detergent if necessary.
CANCEL CYCLE
i | ill | l i p , |
L ~ A , ~ ID,in-
Figure 25
