English
INSTALLATION
Analog connections CD recorder & CD player | Analog connections CD player deck |
This connection must be made for playback on the CD recorder deck as well as the CD player deck (cable 2).
Cable 1 is only required if you want to make recordings from an external analog source.
Use the audio cables supplied. Connect the red plugs to the R sockets, and the white plugs to the L sockets.
1 For recording, connect cable 1 between the ANALOG IN- sockets on the CD recorder and the CDR LINE- or TAPE OUT- sockets of an amplifier.
Note: For recording directly from a CD player, the analog input of the CD recorder should be connected to the analog output of the CD player.
2 For playback, connect cable 2 between the ANALOG OUT- sockets on the CD recorder and the input sockets of an amplifier e.g. TAPE IN, CDR or AUX.
Note: Never use the PHONO input.
This connection is only required if you want to playback on the CD player deck separately from the CD recorder deck. This will be the case in
1 For separate playback on the CD player deck, connect a third cable 3 (not supplied) between the ANALOG OUT sockets of the CD recorder and the input sockets of an amplifier e.g. CD, or AUX.
(Connect the red plugs to the R sockets, and the white plugs to the L socket.)
Note:
-Never use the PHONO input.
-Your CD recorder/player is equipped with a digital coaxial output for the CD player deck. This output can be used for digital playback.
14
