Press and hold menu.
to access the system

8Use Bluetooth devices

With this car audio system, you can listen to audio from a player or make a call through Bluetooth.

Connect a device

Note

•• Philips does not guarantee the compatibility with all Bluetooth devices.

•• Before pairing a device with this system, read its user manual for Bluetooth compatibility.

•• Make sure that Bluetooth function is enabled on your

device, and your device is set as visible to all other Bluetooth devices.

•• At one time, you can connect only one Bluetooth device to this system.

•• The operational range between this system and a Bluetooth device is approximately 3 meters (9 feet).

•• Any obstacle between this system and a Bluetooth device can reduce the operational range.

•• Keep away from any other electronic device that may cause interference.

On your device, follow the steps below.

 

1

Search for Bluetooth devices.

 

2

In the device list, select CE152.

 

3

Enter the default password "0000", and

 

then confirm the password entry.

 

 

»»If the pairing succeeds, [PAIRED] is

 

displayed on the LCD screen of this

4

system.

 

Enable or permit the connection with

 

CE152.

 

 

»»If the connection succeeds,

 

 

[CONNECTED] scrolls and

is

 

displayed on the LCD screen of this

 

system.

 

»»If the connection fails, [FAILED] is displayed on the LCD screen of this system.

Disconnect a device

1

Press and hold

to access the system

2

menu.

 

 

 

Press

/

repeatedly until [DIS--

3

CON] is displayed.

Press

 

.

 

»»[WAIT] is displayed with -, --, and --- blinking alternately until [DISCONNECTED] scrolls.

Tip

•• You can also complete the disconnection on your device.

Reconnect a device

Some Bluetooth devices support the automatic reconnection with a paired Bluetooth device.

If your device does not support automatic reconnection, reconnect it with this system manually.

1

2

Press

/ repeatedly until [RE--CON]

3

is displayed.

Press

.

»»[WAIT] is displayed with -, --, and --- blinking alternately until [CONNECTED] scrolls or [FAILED] appears.

»»If [CONNECTED] scrolls, this system is reconnected to the last connected device.

Tip

•• You can also complete the reconnection on your device.

20EN

Page 21
Image 21
Philips CE152 user manual Use Bluetooth devices, Connect a device, Disconnect a device, Reconnect a device