Philips CE152 user manual Mount into the dashboard, Rear L, Rear R, Antenna

	ISO male	Connect to
	connectors
i	Yellow strip	To the +12V car
		battery which is
		energized at all times

2 Connect the antenna and amplifier as illustrated, if applicable.

L

REAR

R

	d c b	a
	Sockets on rear	External sockets or
	panel	connectors
1	For ISO male	As indicated above
	connectors
2	REAR L	Rear left speaker
3	REAR R	Rear right speaker
4	ANTENNA	Antenna

Tip

•• The pin arrangement for the ISO connectors depends on the type of your vehicle.To avoid damage to the unit, connect properly.

Mount into the dashboard

• If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.

• If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other.

1 Make sure that the car dashboard opening is within these measurements:

5mm

183 mm

53mm

2 Remove the mounting sleeve with the supplied disassembly tools.

8EN