Perform the upgrade
1 Check the current firmware version of this product. (see 'Check the current version of DAB firmware' on page 17)
2 Go to www.philips.com/support.
3 Log in with your account for Club Philips.
»Support information about your registered product is displayed.
4 Click the link of "Firmware Upgrade Readme File" (the exact wording of this link name may vary in different languages).
5 Read and understand the instructions on firmware upgrade.
6 Follow the instructions to download the upgrade packet and complete the upgrade.
•If the upgrade fails, reboot this system, and then perform the upgrade again.
13Product information
Note
•Specifications are subject to change without prior notice.
General
Power supply | 12 V DC (11 V - 16 |
| V), negative ground |
Fuse | 15 A |
Suitable speaker | 4 - 8 |
impedance |
|
Maximum power | 50 W x 4 channels |
output |
|
Continuous power | 22 W x 4 RMS |
output | (4 10% T.H.D.) |
2.0 V | |
voltage |
|
500 mV | |
Dimensions |
|
(W X H X D) | 182 X 52 X 95 mm |
Weight (main unit) | 1.0 kg |
Radio |
|
|
|
Frequency range | 87.5 - 108.0 MHz |
- FM | (100kHz per step in |
| auto search and 50kHz |
| per step in manual |
| search) |
Usable sensitivity - | 8 µV |
FM (S/N = 20 dBA) |
|
Frequency range - | 522 - 1620 KHz |
AM(MW) | (9 kHz) |
| 530 - 1710 kHz |
| (10 kHz) |
Usable sensitivity - | 30 µV |
AM(MW) (S/N = |
|
20 dBA) |
|
Frequency range - | 174.928 - 239.200 MHz |
DAB |
|
EN 25
