1Take out the disc or tape and turn off the car audio.
2Check the cause of the malfunction.
3If the amplifier is overheated, let it cool down.
Replace fuse
If there is no power, the fuse might be damaged and need to be replaced.
1Pull out the damaged fuse.
2Replace the fuse with the supplied fuse or buy a new fuse that matches the rating of the damaged fuse (30A x 1).
If the fuse gets damaged immediately after it has been replaced, the amplifier might have internal malfunction. Consult qualified personal for repair.
5Product information
Note
•Product information is subject to change without prior notice.
Power output | - 4 ohm | 75W x 2 |
(RMS) |
|
|
| - 2 ohm | 110W x 2 |
| - 4 ohm | 220W x 1 |
| (bridged) |
|
Total harmonic |
| 0.09% |
distortion |
|
|
Signal to noise |
| 100dB |
ratio |
|
|
Channel separation |
| 50dB |
Frequency |
| |
response |
|
|
Input sensitivity |
| 300mV - 6V |
Input impedance |
| 22k ohm |
Fuse rating |
| 30A x 1 |
Dimensions (D x |
| 246 x 240 x |
W x H) |
| 54mm |
Weight |
| 1.98kg |
10EN
