Connect speakers
Note
•Use speakers with an impedance of 2 to 8 ohm (4 to 8 ohm when used as a bridged amplifier).
•Match the “left”, “right”, “+” and
Option 1: Stereo mode: connect 2 speakers
(30A)
4 ohm | 4 ohm |
speaker | speaker |
Option 2: Mono bridged mode: connect 1 speaker
(30A)
4ohm speaker
Option
| (30A) |
4 ohm | 4 ohm |
speaker | speaker |
8 ohm speaker
Connect car audio
Option 1: Line input connection | English |
| |
Connect the amplifier to the car audio with an |
|
RCA cable (not supplied). |
|
Car audio unit
LINE OUT
Option 2: Line output connection Connect the amplifier to another amplifier.
Connect power
1Make the power connection as illustrated below:
•Connect the ground wire from the car to the GND socket.
•Connect the remote wire from the car audio to the REM socket.
•With this connection, you can turn on/off the amplifier with the car audio.
•Connect the power wire from the car battery to the +12V socket.
EN 7
