Philips DC156/37 CD Operation, Loading a disc, Basic playback controls, English, To play a disc

CD Operation

English	STANDBY-ON	MICRO SYSTEM DC156
	iR	CD/CD -R/CD -RW COMPATIBLE
	SOURC E
		REPEAT	DBB
	PRESE T
	DOCK
	IMPORTANT:

The lens of the CD player should never be touched.

Loading a disc

This CD player plays Audio Discs including CD-R (CD-Recordable) and CD-RW (CD-Rewritable).

●CD-ROM, CD-I, CDV, MP3 CD,VCD, DVD or computer CDs, however, are not possible.

1Select CD source.

2Lift the CD door on the top of

the system to open the CD compartment.

➜“OPEN” is displayed when

you open the CD compartment.

3Insert a disc with the printed side facing up and press down on PULL TO OPEN to close the CD door.

➜ “rEAd” is displayed as the CD player scans the contents of a disc, and then the total number of tracks is shown.

Basic playback controls

To play a disc

●Press 2; to start playback.

➜ The current track number and the PLAY icon are displayed during disc playback.

To select a different track

●Press TUNING 4 ¢ (on the remote control 4 / ¢) once or repeatedly until the desired track number appears in the display.

To find a passage within a track

1Press and hold down on TUNING 4 ¢

(on the remote control 4 / ¢).

➜ The disc is played at high speed and low volume.

2When you recognise the passage you want, release TUNING 4 ¢ (on the remote control 4 / ¢).

➜ Normal playback continues.

To interrupt playback

●Press 2; during playback.

➜The display freezes and the PLAY icon flashes when playback is interrupted.

➜To resume, press 2; again.

To stop playback

●Press 9.

Notes: CD play will also stop when;

–the CD door is opened.

–the disc has reached the end.

–you select another source: TUNER, iPod or AUX.

–you select standby.

16