Philips DC290/93 quick start Set time and date, Set the alarm timer, Play from iPod/iPhone

2 Setup

			Enjoy
2
	Setup	23

23 Enjoy

ASet time and date

1In standby mode, press and hold SET TIME/PROG for 2 seconds.

»» [24 HR] begins to blink.

2Press OK/ to select the 12/24 hour format.

3Press SET TIME/PROG to confirm.

»» The hour digits begin to blink.

4Press / to set the hour.

5Press SET TIME/PROG to confirm.

»» The minute digits begin to blink.

6Repeat steps 4-5 to set the minute, year, month, and day.

BSet the alarm timer

You can set two alarms which go off at different time.

1Ensure that you have set the clock correctly.

2Press and hold ALM 1 or ALM 2 for 2 seconds.

»» [AL 1] or [AL 2] begin to blink.

3Press SOURCE on the top panel to select an alarm sound source: iPod/ iPhone, FM tuner, or buzzer.

4Press ALM 1 or ALM 2.

»» The hour digits begin to blink.

5Press / repeatedly to set the hour.

6Press ALM 1 or ALM 2 to confirm.

»» The minute digits begin to blink.

7Repeat steps 5-6 to set the minute.

8Repeat steps 5-6 to select whether to ring alarm the whole week, on weekdays, or at weekend.

9Repeat steps 5-6 to set the alarm volume.

ETip

•• If you set iPhone/iPod playlist as the sound source, you must create a playlist in iTunes called “PHILIPS” and import it to your iPhone/iPod.

•• If no playlist is created in the iPod/iPhone or there is no song in the playlist, the unit will wake to songs in the iPod/iPhone.

Activate and deactivate the alarm timer

1Press ALM 1 or ALM 2 repeatedly to activate or deactivate the timer.

»» If the timer is activated, [ AL 1] or [ AL2] is displayed.

»» If the timer is deactivated, [ AL1] or [ AL2] disappears.

Repeat alarm

1When the alarm rings, press

BRIGHTNESS/REP ALM.

»» The alarm repeats ringing minutes later.

ETip

»» You can press / to adjust the interval to repeat alarm.

Stop alarm ring

1When the alarm rings, press the corresponding ALM 1 or ALM 2. »» The alarm stops but the alarm

settings remain.

APlay from iPod/iPhone

1Lift up the iPhone/iPod dock on the top panel.

2Place the iPhone/iPod into the dock.

3Press iPhone/iPod to select iPod/ iPhone source.

»» The connected iPod/iPhone plays automatically.

•To pause/resume play, press OK/.

•To skip to a track, press / .

•To search during play, press and hold /, then release to resume normal play.

•To go back to the previous iPod/iPhone menu, press MENU. To scroll through the menu, press / .

•To confirm a selection, press OK/.

»» If no key is pressed for more than 10 seconds, OK/ acts back as the play/pause key.

BProgram and listen to radio stations

1In the tuner mode, press and hold SET TIME/PROG for more than 2 seconds to activate automatic program mode.

»» [AUTO] (auto) is displayed.

»» All available stations are programmed in the order of waveband reception strength.

»» The first programmed radio station is broadcast automatically.

2Press / to select a preset number.

ETip

•• Detailed functions and features are described in the user manual.