Maintenance
Clean the cabinet
Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Clean discs
When a disc becomes
dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.
Do not use solvents such as benzene, thinner, commercially available
cleaners, or antistatic spray intended for analogue records.
Clean the disc lens
After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
9 Troubleshooting
English
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome).When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
No power
Ensure that the AC power plug of the unit is connected properly.
Ensure that there is power at the AC outlet.
To save power, the unit switches to Eco Standby mode automatically after 15 minutes in standby mode.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power plug, then turn on the unit again.
No disc detected
Insert a disc.
Check if the disc is inserted with the print side facing inward.
Wait until the moisture condensation at the lens has cleared.
Replace or clean the disc.
8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF
EN 21
