8 Other features
Set the sleep timer
This system can switch to standby automatically after a set period of time.
1When the system is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
»When sleep timer is activated,is displayed.
To deactivate sleep timer
1Press SLEEP repeatedly until “OFF” is displayed.
»When sleep timer is deactivated, [SLEEP](sleep)disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The disc/radio/USB/iPod is activated to play at a preset time.
Note
•Ensure that you have set the clock correctly.
1Press to switch to standby mode.
2Press and hold SLEEP/TIMER for more than two seconds.
»A prompt to select the source is displayed.
3Press CD, iPod, TUNER, DAB, or USB to select a source.
4Press SLEEP/TIMER to confirm.
»The clock digits are displayed.
»The hour digits begin to blink.
5Press / to set the hour.
6 | Press SLEEP/TIMER to confirm. |
| ||||
7 | » The minute digits begin to blink. | English | ||||
Press | / to set the minute. | |||||
| » The timer is set and activated. |
| ||||
| » |
|
|
| is displayed. |
|
|
|
|
|
|
Activate and deactivate the alarm timer
1Switch the system to standby mode.
2Press TIMER repeatedly to activate or deactivate the timer.
» If the timer is activated, is displayed.
»If the timer is deactivated, disappears on the display.
Note
•If DISC/USB/iPod source is selected and the track cannot be played, tuner is activated automatically.
Play from an external device
You can also listen to an external audio device through this unit.
1Press USB/MP3 LINK to select the MP3 link source.
2Connect the supplied MP3 link cable to:
•the MP3 LINK jack (3.5mm) on the unit.
•the headphone jack on an external device.
3Start to play the device (see the device user manual).
EN 21