Philips DCM105 user manual Listen to an audio player, Activate and deactivate alarm timer, Disc

Note

‡If the iPod source is selected but no iPod is connected, the system will switch to the tuner source automatically.

Activate and deactivate alarm timer

1In the standby mode, press SLEEP/TIMER repeatedly to activate or deactivate timer.

»If timer is activated, the display shows .

»If timer is deactivated, disappears on the display.

Note

‡Alarm timer is not available in MP3 LINK mode.

‡If the DISC source is selected and the track cannot be played, tuner is activated automatically.

11Product information

Note

‡Product information is subject to change without prior notice.

6SHFLÀFDWLRQV

$PSOLÀHU

Rated Output Power	2X5W RMS
Frequency Response	60 - 16kHz, ±3dB
Signal to Noise Ratio	>65dB
Aux Input	0.5 V RMS 20kohm

Listen to an audio player

You can listen to an MP3 player through this unit.

1Press MP3 LINK to select MP3 LINK source.

2Connect the supplied MP3 link cable to: ‡ MP3 LINK jack (3.5 mm) on the unit ‡ the headphone jack on an external

device

3Start to play the device (see the device user manual).

Disc

Laser Type	Semiconductor
Disc Diameter	12cm/8cm
Support Disc	CD-DA, CD-R,
	CD-RW
Audio DAC	24Bits / 44.1kHz
Total Harmonic	<1%
Distortion
Frequency Response	60Hz -16kHz
	(44.1kHz)
S/N Ratio	>65dBA

16EN