Get started, Prepare the remote control

4 Get started

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the rear of the apparatus.Write the numbers here: Model No. __________________________

Serial No. ___________________________

Prepare the remote control

Caution

Risk of explosion! Keep batteries away from

KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV LQÀUH

1Open the battery compartment.

2Insert 2 AAA batteries (not supplied) with correct polarity (+/-) as indicated.

3Close the battery compartment.

Note

If you are not going to use the remote control for a long time, remove the batteries.

Do not use old and new or different types of batteries in combination.

Batteries contain chemical substances, so they should be disposed of properly.

Auto install radio stations

When you connect the unit to the power VXSSO\IRUWKHÀUVWWLPHRUQRUDGLRVWDWLRQLV stored in this unit, Plug and Play is activated to store all available radio stations automatically.

1Connect the unit to the power supply.

»[AUTO INSTALL - PLEASE PRESS PLAY, STOP CANCEL] (auto install - press ; to cancel, press ) is displayed.