3 Get started

Caution

•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Connect FM antenna

Tip

•• For optimal reception, fully extend and adjust the position of the antenna.

1 Connect the supplied FM antenna to the FM AERIAL jack on the main unit.

FM AERIAL

Connect AM antenna

1 Assemble the AM loop antenna.

2 Connect the AM loop antenna to the AM AERIAL jack on the rear of the main unit.

AM AERIAL

Note

•• Position the antenna as far as possible from a TV, VCR or other radiation source.

12EN

Page 12
Image 12
Philips DCM250/37 user manual Get started, Connect FM antenna, Connect AM antenna, Assemble the AM loop antenna