![](/images/new-backgrounds/1258014/25801417x1.webp)
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
•Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the main unit.
1 Connect the power cord to the AC~MAINS jack on the main unit.
2Connect the power plug to the wall outlet.
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
For fi
1Remove the protective tab to activate the remote control battery.
To replace the remote control batteries:
1Open the battery compartment.
2Insert one lithium CR2025 battery with correct polarity
3Close the battery compartment.
Note
•Before you press any function button on the remote control, fi rst select the correct source with the remote control instead of the main unit.
•If you are not going to use the remote control for a long time, remove the battery.
Set clock
1In standby mode, press PROG/CLOCK on the remote control to activate the clock setting mode.
»The 12 hour or 24 hour format is displayed.
10EN