TROUBLESHOOTING
Symptom | Remedy |
Disc can’t be played | – Ensure the disc label is upwards. |
| – Clean the disc. |
| – Check if the disc is defective by trying anoth- |
| er disc |
The player does not | – Aim the remote control directly at the |
respond to the remote | sensor on the front of the player. Avoid all |
control | obstacles that may interfere with the signal |
| path. Inspect or replace the batteries. |
Distorted or B/W | – Use only discs formatted according to the |
picture with DVD |
|
Player does not respond | – Operations are not permitted by the disc. |
to all operating commands | – Refer to the instructions in the disc inlay. |
during playback |
|
Player feels warm | – When the player is in use for a long |
| period of time, the surface will be heated. |
| This is normal. |
Display goes dimmer when | – The unit is saving power to ensure longer |
AC is unplugged | playtime with battery. It is normal. |
| Adjust the brightness using the rotary bright- |
| ness control. |
This set complies with the radio interference requirements of the European Union.
TECHNICAL DATA
Dimensions | 235 x 178 x 40 mm |
Weight | 909 g |
Power supply | DC 9V 1.0A |
Power Consumption | 9W |
Operating temperature range | 0 - 45°C |
Laser wavelength | 650nm |
Video system | NTSC |
Frequency response | 20Hz ~ 20KHz ± 1dB |
Signal/noise ratio | ≥ 80dB |
Audio distortion + noise | ≤ |
Channel separation | ≥ 80dB |
Dynamic range | ≥ 80dB |
Output |
|
Audio out (analog audio) | Output level: 2V ± 10% |
Load impedance: | 10KΩ |
Video out Output level: | 1Vp - p ± 20% |
Load impedance: | 75Ω |
PHILIPS reserves the right to make design and specification changes for product improvement without prior notice.
Modifications not authorized by the manufacturer may void users authority to operate this device.
All rights reserved.
English
21
