60

EN
4.3 Rear panel
1RF OUT (*) ................................................ RF output used to connect your receiver to a VCR/TV set to watch analogue
channels only,or to connect another receiver
2RF IN (*)..................................................... RF input used to connect the RF coaxial cable from the wall socket
3USB (*) ....................................................... For future use
4L/R AUDIO OUT (*)................................... Left/Right analogue audio outputs to connect your receiver to your TV
left/right analogue inputs
DIGITAL AUDIO OUT (*) .......................... Digital audio output to connect your receiver to the digital coaxial input of
your digital audio equipment
5YPbPr VIDEO OUT (*) .............................. Outputs to connect your receiver to the YPbPr or component inputs of your
TV set or video projector(2)
6EXT1/TO TV (*) ......................................... SCART(1) output used to connect your TV set or video projector(2)
7EXT2/AUX (*) ............................................ SCART(1)output to connect your video recorder or DVD player
8SPDIF (*) .................................................... Digital audio output to connect your receiver to the digital optical input of
your digital audio equipment using an optical cable (not supplied)
9HDMI (*) .................................................... HDMI socket used to connect your TV set HDMI input
10 ................................................................... Label showing the type and serial number of the receiver
11 230V~50Hz 15W max(**) .......................... Socket to connect the mains cord
* Safety Extra Low Voltage
** Hazardous Voltage
(1) SCART is also called Euroconnector or Péritel.
(2) If you consider using a video projector,refer to its user manual for the best video format to feed it.If necessar y,refer to
paragraph 13.5.2 to properly set the EXT1/EXT2 SCART Output.

TYI O P

REW U P

10 11

Q