Switching on for the first time
| 1 Connect your equipment according to the appropriate | |
English | system diagram given on the previous pages and power | |
up/turn on the equipment. | ||
| ||
| During initialisation the indicator on the front panel will | |
| flash red for a few seconds and then remain off. If the indi- | |
| cator is red (stand by) press the Power key on the | |
| remote control. | |
| The front panel indicator will now be off. | |
| 2 To switch off the set top box, press Power again. | |
| With the Set Top Box on, the FIRST TIME INSTALLA- | |
| TION window displays. You are asked to enter the type of | |
| TV set you are using. |
3 Use the keys to choose either NORMAL 4:3 or WIDESCREEN 16:9.
4 Press the key to start installation.
The following message displays.
5 Use the keys to highlight Yes and then press
the key.
The system then starts to search all channels for available radio and TV stations. This may take a few minutes.
The stations found are listed in the centre panel.
A progress bar below the listing panel shows the channels searched so far within the scan range (21 - 68).
When scanning has finished, the received stations are automatically arranged in numerical order.
10GETTING STARTED
The TV set then plays the station at the top of this sorted list. The Info box for the TV station playing displays for a short time. The TV station continues to play the pro- gramme.
Note: Your receiver, as with any electronic equipment, con- sumes power. In order to reduce power consumption, please switch your receiver to standby when not in use. If you will not be using your receiver for a long period of time, we recommend unplugging it from the mains outlet.