8
3. Before restoring archive data from the disk array (searching
the disk array’s indexes), the DVR1 must stop recording.
3 Adding Hard Drives
This section is required if your unit was shipped without hard drives installed, or if
the user needs to replace a faulty drive.
Caution: Do not allow any metal object to contact the motherboard. Do not
allow loose screws to become lost inside the DVAA chassis. Wear an Electro
Static Discharge protection device any time work is being performed inside the
unit.

3.1 Opening The DVAA

Before removing the cover, turn off the unit and unplug it. Using a Phillips-head
screwdriver, carefully remove the twelve screws fastening the lid to the chassis.
Save the screws and use them to refasten the lid when finished.

3.2 Identifying The Components

Complete Internal Overview
Mother
Board
Disk
Array
Power
Supply